Below, you can find an organized list of all the tutorials and lessons featured on this website. Each section in independent. Inside each section, while I try to make every post standalone, it is recommended to go through them in the order in which they are numbered. Keep in mind that this is a living blog. Every week new articles and tutorials are added, so expect this list to grow quickly! If you’re new, or your knowledge of electronic theory is a little rusty, I suggest tackling the amplifier section first. It’s not the simplest, but it assumes near zero prior knowledge, and I did my best to make the learning curve as smooth as possible.
This blog is still rather new. As such, typos and formatting problems are present. I’m doing my best to clean this up as fast as possible. I hope you’ll find these articles helpful!
Amplifiers
- Building Block I – The Amplifier
- AMP I.1 – The Bipolar Junction Transistor
- AMP I.2 – The Junction Field Effect Transistor
- AMP I.3 – BJT Classical Configurations
- AMP I.4 – The Common Emitter Amplifier
- AMP I.5 – The Common Collector Amplifier
- AMP I.6 – The Common Base Amplifier
- AMP I.7 – The Miller Effect
- AMP I.8 – The Cascode Amplifier
- AMP I.9 – JFET Biasing
- AMP I.10 – The Common Source Amplifier
- AMP I.11 – The Common Drain Amplifier
- AMP I.12 – The Common Gate Amplifier
- AMP I.13 – Beyond Classical Circuits (aka- WTF Does That Part Do?)
- AMP I.14 – Amplifier Characteristics
- AMP II.1 – Introducing Feedback
- AMP II.2 – General Feedback Theory
- AMP II.3 – Designing Feedback Transistor Amplifiers
- AMP II.4 – Input and Output Resistance of Feedback Amplifiers
- AMP II.5 – Bandwidth of Feedback Amplifiers
- AMP II.6 – Amplifier Stability
Filters
- FIL I.1 – Introducing Filters
- FIL I.2 – The Different Filter Families
- FIL I.3 – Filter Design Basics
- FIL I.4 – Active Filters
Oscillators
Mixers
Ramblings